Skip to main content

How to convert .VDI to .VMDK and .VMDK to .VDI

Hello Friends,

If you working with Virtual Machines (Oracle Virtual Box and VMWARE), Then sometimes we need to convert the Disk files from .VDI to .VMDK and .VMDK to .VDI.
Below are the commands to make it convert. (To convert make sure that Oracle Virtual BOX installed).

To convert from .VDI to .VMDK:-
 c:\program files\sun\VirtualBox> VBoxManage clonehd "The Path of.vdi" "The Path of .vmdk" -format VMDK
Hit <<Enter>>.
It will starts converting.


To convert from .VMDK to .VDI:-
c:\program files\sun\VirtualBox> VBoxManage clonehd "The Path of.vmdk" "The Path of .vdi" -format VDI
Hit <<Enter>>.
It will starts converting

*****The Path can be change of Virtual box as per your installation.*****

Let me know if you face any issues.

Thanks for reading this.
Pankaj

Popular posts from this blog

How to schedule an Automatic Reboot of WatchGuard Firebox?

We have a Customer who having some issues with the WatchGuard Firewall,
We want to schedule a Reboot of the Firebox Each morning at 04:30AM so that when customer arrive in the office he would not face any problem.
For this :
1) Click on WatchGuard Firebox ICON (You may be having a Shortcut on your Desktop)
2) Give the Password to connect to Concern Firewall
3) Once you Connected, Go to File > Connect to Device > Choose the Firewall IP and Click on Connect. It may ask for the password, Please provide that.
4) Once you connected it will show you the Firewall with all the configuration.
5) Right Click on it and Go to Policy manager > When Policy manager Open, Click on "Setup" and then "Global Settings", At the Last you will found an option to define the time when you want a Schedule Reboot.

After making the change, Don't forget to make it Save in the Firewall Config File.

"Options" option not working on OWA (Outlook Web Access)

When we opening a OWA and Going to options to change the password/Configure the Out of Office or something else, We are getting logged out.

Solutions:-

To resolve this you must have to connect to your Exchange Server.
Go to EMC > Server Configuration > Exchange Control Panel > ECP > Properties. Made the change the ECP Settings (changed from Use Form based authentication to Basic Authentication). It will work now. http://technet.microsoft.com/en-in/library/dd876904(v=exchg.141).aspx

ShadowProtect:Cannot Consolidate:Keyfile not found

We have ShadowProtect MSP version installed on a Server. We are using the StorageCraft Image Manager to consolidate and Verify the image. We found that we are getting Error "Cannot Consolidate:XXXXXX.spi Keyfile not found
We checked and found that everything is correct.
Finally when we contacted the StorageCraft team they suggest us to create a Key file from C:\PrgramFiles\StorageCraft\Keymaker.exe
Run this EXE, Use the Password (Any password which you can remember), Browse the Same file (Which is in the Error),After selection give the extention .spk and save it.
Refresh the Image manager (Restart the service) and Check.
It will be resolved.

For details follow this article.
http://support.storagecraft.eu/kb_details.aspx?id=KB10064